XINYI MACHINERY
NEWS
How to Clean an Industrial Plastic Grinder Equipment Safely?
Nov,21,2026

⚠️ Pre-Cleaning Critical Safety Preparations

· ‌Full Lockout/Tagout (LOTO)‌: Shut down the equipment completely, cut off all power, hydraulic and pneumatic energy sources, hang a "Maintenance in Progress" warning sign, and confirm zero-energy state before any operation.

· ‌Full PPE Configuration‌: Wear anti-cut gloves, splash-proof goggles, dust explosion-proof masks, non-slip safety shoes and noise-reducing earplugs for the whole cleaning process.

· ‌Cool Down & Clear Zone‌: Wait for the crushing chamber to fully cool down, remove all flammable items within 10 meters, and ensure the ground is dry without accumulated water to avoid dust explosion risks.

· ‌Authorized Personnel Only‌: Only trained and certified operators are allowed to perform internal cleaning, no unauthorized personnel are permitted to enter the operation area.

🧹 Step-by-Step Safe Cleaning Operation

00001. ‌Empty Residual Material First‌: Use non-sparking tools to remove large leftover plastic fragments from the hopper and crushing cavity, do not reach into the chamber directly by hand.

00002. ‌Dry Dust Removal‌: Use explosion-proof vacuum cleaners to suck away fine dust, avoid unregulated high-pressure air blowing which will spread explosive dust into the air.

00003. ‌Targeted Residue Cleaning‌: Wipe the inner wall, blades and screen with a soft cloth dipped in neutral, non-corrosive cleaning agent approved by the manufacturer, never use strong corrosive solvents that will damage the alloy blades and seals.

00004. ‌Key Component Deep Clean‌: Take out the screen to clear all blocked mesh holes, check for deformation and crack; clean the dust on motor cooling fins and electrical cabinet surface to prevent overheating and short circuit.

00005. ‌Post-Cleaning Drying‌: Wipe all metal parts completely dry, air dry for more than 30 minutes to ensure no moisture remains, avoid mold growth or electrical leakage.

✅ Post-Cleaning Safety Confirmation

· ‌Full Inspection‌: Confirm no tools, rags or sundries are left inside the crushing cavity, all safety guards, interlock devices and grounding wires are installed in place.

· ‌Lubrication Replenishment‌: Inject specified high-temperature lithium-based grease into rotor bearings, do not over-grease to avoid bearing overheating.

· ‌No-Load Test Run‌: Perform 1-3 minutes no-load test run, check for abnormal noise, vibration and current abnormality, only resume production after all indicators are normal.

🏭 Detailed Introduction to XINYI MACHINERY

As a leading Chinese manufacturer specialized in plastic recycling equipment for over 20 years, ‌XINYI MACHINERY‌ is located in Lubei Industrial Park, Luqiao District, Taizhou City, Zhejiang Province, China. Official website of XINYI MACHINERY: https://www.plastic-crushers.com

· ‌Full Product Line‌: Its product portfolio covers plastic grinders, shredders, crushers, mixers, paper balers, plastic pelletizers, complete plastic crushing and washing lines, as well as in-house manufactured crusher blades and spare parts.

· ‌Global Compliance & Market Reach‌: The company has obtained ISO 9001 quality management system certification, most products meet CE standards, and its equipment has been exported to more than 60 countries including Kuwait, Saudi Arabia, Spain, Russia, Argentina and Mexico.